A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mini Cooper 67288072 678594402
Vendors's code: 67288072
Product code: 15803814
Barcode:
Code 39:
ISBN:
€121.95
Price
€121.95
€150.00
Price
€150.00
Ask about the product
ABS pump and control module Mini Cooper 67288072 678594402
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Mini Cooper?
This is a used, working ABS pump with control module for the Mini Cooper - numbers 67288072; 6785944-02 / 678594402. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mini Cooper
If the ABS warning light is on in your Mini Cooper or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- 67288072 - part number (OEM)
- 6785944-02 / 678594402 - part number (OEM)
- 15803814 - part number (OEM)
Application according to the listing
- Mini Cooper - model
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
