A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volvo V70 9157654B 9467582
Vendors's code: 9467582
Product code: 9157654B
Barcode:
Code 39:
ISBN:
$207.95
Price
$207.95
$255.77
Price
$255.77
In stock
Ask about the product
ABS pump and control module Volvo V70 9157654B 9467582
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Volvo V70?
This is a used, working ABS pump with control module for the Volvo V70 - numbers 9157654B; 9467582. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volvo V70
An ABS pump with control module is one of the key active safety components. This listing applies to: Volvo V70; the part is used, working and in good condition.
Numbers to compare
- 9157654B - part number (OEM)
- 9467582 - part number (OEM)
- 10.0204-0113.4 / 10020401134 - ABS pump number (ATE)
- 10.0949-0407.3 / 10094904073 - ABS control module number (ATE)
Application according to the listing
- Volvo V70 - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
The number 9157654B also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
Customers Also Viewed
-
Price $204.62Price $166.36
