A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volvo S80 9467581 9467582
Vendors's code: 9467581
Product code: 9467582
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
Ask about the product
ABS pump and control module Volvo S80 9467581 9467582
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Volvo S80?
This is a used, working ABS pump with control module for the Volvo S80 - numbers 9467581; 9467582. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volvo S80
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Volvo S80. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 9467581 - part number (OEM)
- 9467582 - part number (OEM)
- 10.0204-0236.4 / 10020402364 - ABS pump number (ATE)
- 10.0949-0407.3 / 10094904073 - ABS control module number (ATE)
Application according to the listing
- Volvo S80 - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
Compare number 9467581 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
Customers Also Viewed
-
Price €250.00Price €203.25
