ABS Pump AUDI A4 B6 BOSCH 0 265 225 045 0265225045 8E0 614 517 A 8E0614517A 0 130 108 078 0130108078 0 265 950 012 0265950012

Does the ABS pump BOSCH 0 265 225 045 / 0265225045 and 8E0 614 517 A / 8E0614517A fit Audi A4 B6?

Yes, this ABS set was used in Audi A4 B6 in different equipment versions. The numbers 0 265 225 045, 0265225045 and 8E0 614 517 A (8E0614517A) refer to a complete ABS module. However, exact compatibility always depends on matching the part number from the existing unit, as different ABS variants were used.

What is the purpose of ABS control module 0 130 108 078 / 0130108078 in this system?

The control module with numbers 0 130 108 078 and 0130108078 is responsible for the electronics of the entire ABS system. It processes signals from sensors and controls the ABS pump operation. Together with the BOSCH 0 265 225 045 module, it forms a complete braking system.

What are the symptoms of a faulty ABS pump 8E0 614 517 A / 8E0614517A?

The most common symptoms include the ABS warning light, loss of ABS function during braking, and stored fault codes in the control unit. In the case of 8E0 614 517 A, the issue often relates to electronics or internal hydraulic valves.

Is ABS module 0 265 950 012 / 0265950012 part of the same system?

Yes, the number 0 265 950 012 / 0265950012 refers to a related ABS system component. In some Audi A4 B6 versions, it works together with the ABS pump and control unit, forming a complete safety system.

Can ABS pump 0 265 225 045 be refurbished?

In many cases, the ABS pump 0 265 225 045 / 0265225045 can be refurbished. Repairs usually involve the electronics or hydraulic section. This is a common alternative to buying a new module.

Is coding required after replacing 8E0614517A?

Yes, the ABS module 8E0614517A (8E0 614 517 A) usually requires coding and adaptation after installation. Without it, the ABS system may not function properly or may show diagnostic errors.

Why does the Audi A4 B6 ABS pump BOSCH 0265225045 fail?

The most common causes include electronic wear, moisture, internal damage, or electrical system issues. In older Audi A4 B6 vehicles, this is a typical age-related failure.

Can ABS components 0 130 108 078 and 0 265 950 012 be replaced separately?

In some cases yes, but it depends on the ABS system version. Sometimes the control unit 0 130 108 078 and module 0 265 950 012 are tightly integrated and must be replaced as a complete set.