A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Volkswagen Audi ATE 8N0614517A 8N0907379E 10020402284 10094703123
Vendors's code: 10020402284
Product code: 8N0614517A
Barcode:
Code 39:
ISBN:
€487.80
Price
€487.80
€600.00
Price
€600.00
Ask about the product
ABS pump Volkswagen Audi ATE 8N0614517A 8N0907379E 10020402284 10094703123
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 8N0614517A come complete with the control unit?
ABS pump 8N0614517A complete with control unit, used and inspected. Compare the numbers with the original in your car.
Is ABS pump 8N0614517A the right part for your Volkswagen?
ABS module 8N0614517A is used and has been inspected before sale. It is intended for Volkswagen cars, but whether it fits is decided by comparing the numbers with the original part in your car. According to the listing, the pump comes from the Volkswagen Audi model.
Part number 8N0614517A and related numbers
The numbers from the listing, as written on the labels and as a single string:
- 8N0614517A, original Volkswagen number,
- 8N0907379E, Volkswagen control unit number,
- 10.0204-0228.4 (catalogue format: 10020402284), hydraulic block manufacturer's number,
- 10.0947-0312.3 (catalogue format: 10094703123), control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
When an ABS module needs replacing
- the ABS stops working, although basic braking usually remains functional,
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking,
- the ABS warning light comes on together with the stability control warning light.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| Where do I find number 8N0614517A on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Who makes this module? |
| The module is made by ATE. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
Customers Also Viewed
-
Price €600.00Price €487.80
