The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Hyundai Getz Bosch 589101C800 0265231448 0265800388
Vendors's code: 589101C800
Product code: 0265231448
Barcode:
Code 39:
ISBN:
€142.28
Price
€142.28
€175.00
Price
€175.00
Ask about the product
ABS pump Hyundai Getz Bosch 589101C800 0265231448 0265800388
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find number 589101C800 on Hyundai ABS pumps
Used original ABS module with number 589101C800 for Hyundai Getz. Confirm compatibility with the number from your original pump.
Is ABS pump 589101C800 the right part for your Hyundai?
This module is made by Bosch. ABS pump 589101C800 is sold together with its control unit, just as it is fitted to Hyundai cars. According to the listing, the pump comes from the Hyundai Getz model.
Numbers and markings on the ABS pump
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 589101C800, original Hyundai number,
- 0 265 231 448 (catalogue format: 0265231448), hydraulic block manufacturer's number,
- 0 265 800 388 (catalogue format: 0265800388), control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
When an ABS module needs replacing
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the pump motor switches on at unusual moments or runs louder than usual,
- the ABS activates for no reason during normal braking.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Where do I find number 589101C800 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Are the make and model of the car enough to choose the part? |
| No. A single model comes with different versions of the module, depending on the engine, year of manufacture and drivetrain. The most reliable reference is the number on the original pump. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to be certain? Send us the numbers from the block and sticker on your ABS pump, and together we will check whether this part will fit.
