A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Jaguar Bosch K8AM14F447FE 0265291869 0265956419
Vendors's code: K8AM14F447FE
Product code: 0265291869
Barcode:
Code 39:
ISBN:
£185.32
Price
£185.32
£227.95
Price
£227.95
Ask about the product
ABS pump Jaguar Bosch K8AM14F447FE 0265291869 0265956419
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number K8AM14F447FE on an ABS pump mean?
ABS pump K8AM14F447FE complete with control unit, used and inspected. Compare the numbers with the original in your car.
How to identify ABS pump K8AM14F447FE for your Jaguar
ABS module K8AM14F447FE is used and has been inspected before sale. It is intended for Jaguar cars, but whether it fits is decided by comparing the numbers with the original part in your car. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Where to find the numbers on an ABS pump
You will find the numbers on the labels, while catalogues list them as a single string:
- K8AM14F447FE, original Jaguar number,
- 0 265 291 869 (catalogue format: 0265291869), hydraulic block manufacturer's number,
- 0 265 956 419 (catalogue format: 0265956419), control unit number.
Matching by number is more reliable than matching by car model. Compare all the numbers and ask us if any of them does not match.
When an ABS module needs replacing
- the ABS stops working, although basic braking usually remains functional,
- the ABS activates for no reason during normal braking,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS switches itself off shortly after the engine is started.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Where do I find number K8AM14F447FE on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Are the make and model of the car enough to choose the part? |
| No. A single model comes with different versions of the module, depending on the engine, year of manufacture and drivetrain. The most reliable reference is the number on the original pump. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
Customers Also Viewed
-
Price £341.92Price £277.98
