The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
Engine control unit Daihatsu 8966187736 0797005640
Vendors's code: 8966187736
Product code: 0797005640
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine control unit Daihatsu 8966187736 0797005640
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Is this Daihatsu control unit the right one for your engine?
We offer a used engine control unit for Daihatsu - numbers 89661-87736 / 8966187736; 079700-5640 / 0797005640; it is in working order and in good condition. Check the numbers against your own module before ordering.
Daihatsu engine control unit
The engine control unit is the electronic ‘brain’ of the powertrain. This listing is for Daihatsu; the part is used, in working order and in good condition.
How this control unit is marked
- 89661-87736 / 8966187736 - Denso number (manufacturer)
- 079700-5640 / 0797005640 - Denso number (manufacturer)
Vehicle data from the listing
- Daihatsu - model
- Denso - manufacturer
The control unit's role in the engine
The module is linked to the immobiliser system, so after replacing it with a used unit you will usually need to match it to the car. We describe what this involves in the section on versions. The module stores fault codes which, once diagnostic equipment is connected, help to establish whether the sensors, the wiring or the control unit itself is at fault.
How to match this part
We also stock other control units for this model and engine, with different numbers. Match the part by the number on the module, not by the model alone. The numbers on the module appear in two forms: split into groups or as one continuous string. We give both to make the part easier to find.
Symptoms of a faulty control unit
- the engine warning light is on as soon as the ignition is switched on,
- the diagnostic tester cannot connect to the control unit,
- engine speed is displayed incorrectly,
- the system works intermittently.
Inspect the control unit connectors: corrosion or burnt pins can cause symptoms similar to faulty electronics.
Locked or unlocked version?
A locked control unit is sold with the previous vehicle's data - this is an option for workshops that can unlock and program it. The unlocked variant means we prepare the module for you before dispatch; this usually takes approx. 1-2 working days. Whether the chosen method (PIN / CAR PASS, Virgin, IMMO OFF, programming, clone) can be used depends on the specific control unit number, its software and the immobiliser. If in doubt, ask us before ordering. Read about the variants: locked and unlocked explained.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, in working order and in good condition. You will find the warranty period in the product features table. |
| Do I need an immobiliser key for a locked control unit? |
| With a locked control unit, the unlocking and matching are carried out by a workshop. What is needed depends on the model, so ask us about your car. |
| Where does this part come from? |
| The control unit is used and comes from a dismantled vehicle. We give the manufacturer numbers and OEM numbers in the description so that you can compare them. |
Email contact@auto24parts.com with the model, year and the number from your control unit - we will check the fitment.
