The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Isuzu D-Max Bosch 898394765 0265292559 0265956879
Vendors's code: 898394765
Product code: 0265956879
Barcode:
Code 39:
ISBN:
€487.80
Price
€487.80
€600.00
Price
€600.00
Ask about the product
ABS pump Isuzu D-Max Bosch 898394765 0265292559 0265956879
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 898394765 come complete with the control unit?
Used ABS pump with control unit, number 898394765, inspected before sale. Matched by the numbers on the block and sticker.
How to identify ABS pump 898394765 for your Isuzu D-Max
This is a used original ABS pump with a control unit for Isuzu D-Max cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 898394765, and the other numbers from the labels are listed below. According to the listing, the pump comes from the Isuzu D-Max model.
Numbers to compare
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 898394765, original Isuzu number,
- 0 265 292 559 (catalogue format: 0265292559), hydraulic block manufacturer's number,
- 0 265 956 879 (catalogue format: 0265956879), control unit number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
When an ABS module needs replacing
- the ABS warning light comes on after the engine is started and stays on,
- the ABS stops working, although basic braking usually remains functional,
- the pump motor switches on at unusual moments or runs louder than usual,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| Do the brakes need bleeding after replacing the module? |
|---|
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
