Nissan ABS Pumps – Complete ABS / ESP Units

Nissan ABS Pump: Hydraulic Module with ABS Control Unit

An ABS pump in a Nissan is an aluminium hydraulic block with valves and a pump motor, together with a control unit that reads the signals from the wheel speed sensors. On many models the same module also handles the stability control system, so a fault sometimes shows up as more than just the ABS warning light. The module is usually sold and replaced as a single unit.

Our range includes more than a dozen used original modules. Among them you will find original numbers beginning with 476, as well as Bosch (0 265 ...) and ATE (06.2109...) numbers. The range changes regularly, so the items below are only examples.

Nissan X Trail ABS Pump

For the X Trail model our range includes, among others, the following module:

• Nissan X Trail ABS pump, number 47600AR005.

Nissan Renault ABS Pump

Some of the listings describe a module as shared by Nissan and Renault, for example:

• Nissan Renault ABS pump, number 476608548R,
• Nissan Renault ABS pump, number 476609212R.

Nissan ABS pump: Bosch and ATE modules with no model stated

Most of the listings do not state the car model. They include Bosch modules, for example Nissan ABS pump, number 476606RU5A, Nissan ABS pump, number 47660HV44C, Nissan ABS pump, number 47660BG03A and Nissan ABS pump, number 47660HN20C, an ATE module Nissan ABS pump, number 476605XD0A and a listing with the number Nissan ABS pump, number N32073617. The listings do not always state the model and year, so compatibility depends on the number from the original pump.

How to choose an ABS pump for a Nissan by part number

Model and year are not enough, because the same model comes with different versions of the module, depending on the engine, drive and equipment level. In our range you will find several kinds of numbers:

• the original Nissan number, beginning with 476, for example 47660JD010 or 476606RU5A,
• the manufacturer's number for the hydraulic block, for example Bosch 0 265 2xx xxx,
• the control unit number, for example Bosch 0 265 9xx xxx or ATE 06.2109-xxxx.x.

Compare all the numbers with the original pump in your car and, if in doubt, write to us before buying.

Symptoms of a faulty ABS pump or control unit

• the ABS warning light comes on after the engine is started and does not go out,
• the ABS stops working, although basic braking usually remains functional,
• the brake pedal pulses or feels uneven for no obvious reason,
• the control unit stores valve, pump motor or communication faults,
• brake fluid leaks from the hydraulic block, which requires immediate action.

Before deciding on a replacement, check the wheel speed sensors, their wiring and the supply voltage. After replacing the module, the fault codes usually need to be cleared, and after disconnecting the brake lines the system must be bled. On some models the module also needs adaptation in the control unit, so installation is best left to a workshop with a suitable diagnostic scanner.

Used original ABS module: condition and inspection

We sell used original ABS modules, not new parts. Every item is inspected and tested before sale, and the product photos show the look of the block, the numbers and the labels, so you can compare them with your own pump.

Related electronic parts

If you are looking for other modules, see ABS / ESP / ASR control units and electronic car parts.

Ordering, Payment, Delivery and Warranty

Information about placing an order is available on the How to Buy page. The available payment methods are described under Payment Methods, while shipping information can be found on the Shipping and Delivery page.

Our rules on returns, complaints and warranty are set out on the Returns, Warranty and Complaints page. Further answers are also available in the Auto24Parts FAQ.

FAQ: Nissan ABS Pump