The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
ECU Engine Controller SUBARU IMPREZA 1.6 MT DELCO 173238202 238704-005 01228547
Vendors's code:
Product code: 2AB4-12948
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
Regular price:
325,20 zł
0%
400,00 zł
Price
400,00 zł
Regular price:
400,00 zł
0%
In stock
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine Controller SUBARU IMPREZA 1.6 MT DELCO 173238202 238704-005 01228547
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU ENGINE CONTROLLER SUBARU IMPREZA 1.6 MT DELCO 173238202 238704-005 01228547
Tested ECU engine controller Delco for Subaru Impreza 1.6 MT with numbers 173238202, 238704-005, and 01228547, with warranty and fast shipping directly to the customer.
ECU Engine Controller SUBARU IMPREZA 1.6 MT DELCO 173238202 238704-005 01228547
Which models is the 173238202 controller compatible with?
The controller with number 173238202 is compatible with the Subaru Impreza 1.6 MT model, ensuring broad application in this series of vehicles.
What is the role of the ECU in the 1.6 MT model?
The ECU in the Subaru Impreza 1.6 MT, marked with number 238704-005, manages engine operation, ensuring optimal performance and fuel efficiency.
What are the symptoms of a faulty 01228547 controller?
A faulty 01228547 controller may manifest as engine start issues, uneven operation, or increased fuel consumption.
Where to find the number on the controller?
Numbers such as 173238202 and 238704-005 are usually located on the controller's casing, making them easy to identify during installation.
Does the controller require programming after installation?
After installing the 01228547 controller in the Subaru Impreza 1.6 MT, programming may be required to ensure full functionality. Warranty and fast shipping are included in the purchase.
