A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ABS DSC Pump with Control Module BMW ATE MK60E5 34516862872 6862873
Vendors's code: 34516862872
Product code: 6862873
Barcode:
Code 39:
ISBN:
1 138,21 zł
Price
1 138,21 zł
1 400,00 zł
Price
1 400,00 zł
Ask about the product
ABS DSC Pump with Control Module BMW ATE MK60E5 34516862872 6862873
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS DSC pump 34516862872 – does it fit your BMW?
This is a used, working ATE MK60E5 ABS/DSC unit for BMW: hydraulic pump number 34516862872 with control module 6862873. The car model is not specified – compare both numbers with the labels on the pump and module in your car.
ABS DSC Pump with Control Module BMW ATE MK60E5 34516862872
An ABS/DSC unit consists of a hydraulic pump (valve block) and a control module bolted to it. The module reads the wheel speed sensors, and the pump regulates pressure in the brake circuits – it prevents the wheels from locking and handles the DSC stability control functions. This is an ATE MK60E5 unit from a BMW; the car model is not specified, so the part is matched by its numbers.
Part numbers to compare
- 34516862872 – BMW pump (hydraulic unit) number, on the label: 3451 6862872
- 6862873 – BMW DSC control module number
- MK60E5 – ATE system type
MK60E5 is a system family, not a part number – MK60E5 units differ in pump version, module version and software. That is why you should compare both numbers: the pump and the module.
Signs of a faulty ABS/DSC pump or module
When the ABS/DSC unit starts to fail, the most common signs are:
- ABS and DSC warning lights on, often with a stability control fault message,
- ABS or DSC not working while driving,
- no communication with the module or a pump fault stored in memory.
Before replacing the unit, read the fault codes with a diagnostic tool and check the wheel speed sensors, fuses and module connector – a faulty sensor can cause similar symptoms. After fitting, the brake system must be bled, and the DSC module usually needs coding with a diagnostic tool.
Frequently asked questions
| Which BMW does the 34516862872 ABS pump fit? |
|---|
| This ATE MK60E5 unit comes from a BMW. The car model is not specified, so it is matched by its numbers – compare the pump and module numbers with the labels in your car. |
| Will any ATE MK60E5 pump fit? |
| No. MK60E5 is a system family – individual versions differ in pump and module numbers and in software. |
| Does the DSC module need coding after replacement? |
| Usually yes – after fitting, the module is coded with a diagnostic tool. The brake system must also always be bled. |
| What condition is this ABS/DSC unit in? |
| It is a used part in good working condition. The warranty period is shown in the product specification table. |
Not sure whether this unit fits your BMW? Send us photos of the pump and module labels and we will confirm compatibility.
