A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen 1K0614517DG 1K0907379BJ
Vendors's code: 1K0907379BJ
Product code: 1K0614517DG
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Volkswagen?
This is a used, working ABS pump with control module for the Volkswagen - numbers 1K0614517DG; 1K0907379BJ. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Volkswagen. The part is used, working and in good condition.
Numbers to compare
- 1K0614517DG - part number (OEM)
- 1K0907379BJ - part number (OEM)
Application according to the listing
- Volkswagen - model
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.