A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Audi Volkswagen Seat Skoda 1K0614517DJ 1K0907379BJ
Vendors's code: 1K0614517DJ
Product code: 5598-7756A
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Audi Volkswagen Seat Skoda?
This is a used, working ABS pump with control module for the Audi Volkswagen Seat Skoda - numbers 1K0 614 517 DJ / 1K0614517DJ; 1K0907379BJ. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Audi Volkswagen Seat Skoda
This ABS pump with control module is intended for: Audi Volkswagen Seat Skoda. It is a used, working part in good technical condition.
Numbers to compare
- 1K0 614 517 DJ / 1K0614517DJ - part number (OEM)
- 1K0907379BJ - part number (OEM)
- 10.0212-0684.4 / 10021206844 - ABS pump number (ATE)
Application according to the listing
- Audi Volkswagen Seat Skoda - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
Compare number 1K0 614 517 DJ in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.