A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ABS Pump with Control Module BMW F20 F30 ATE 6868318 6868319
Vendors's code: 6868318
Product code: 6868319
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
Ask about the product
ABS Pump with Control Module BMW F20 F30 ATE 6868318 6868319
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump 6868318 – does it fit your BMW F20 or F30?
This is a used, working ATE ABS unit: hydraulic pump 6868318 with control module 6868319. This unit was fitted to the BMW 1 Series F20 and 3 Series F30. Before buying, compare both numbers with the labels on the pump and module in your car.
ABS Pump with Control Module BMW F20, F30 ATE 6868318
An ABS unit consists of a hydraulic pump (valve block) and a control module bolted to it. The module reads the wheel speed sensors, and the pump regulates pressure in the brake circuits so that the wheels do not lock under braking. The 6868318 / 6868319 unit was fitted to the BMW 1 Series F20 and 3 Series F30.
Part numbers to compare
- 6868318 – BMW ABS pump number, full number 34516868318, on the label: 3451-6868318-01
- 6868319 – BMW ABS control module number
Compare both numbers – the pump and the module. ABS units with other numbers, differing in module version and software, were fitted to the same BMW models, so the car model alone is not enough to choose the right part.
Signs of a faulty ABS pump or module
When the ABS unit starts to fail, the most common signs are:
- the ABS warning light comes on, often together with the DSC light,
- ABS does not work under braking,
- no communication with the module or a pump fault stored in memory.
Before replacing the unit, read the fault codes with a diagnostic tool and check the wheel speed sensors, fuses and module connector – a faulty sensor can cause similar symptoms. After fitting, the brake system must be bled, and the module usually needs coding with a diagnostic tool.
Frequently asked questions
| Which BMW does the 6868318 ABS pump fit? |
|---|
| The 6868318 / 6868319 unit was fitted to the BMW 1 Series F20 and 3 Series F30. Other versions were also fitted to these models, so compare the numbers with the labels in your car. |
| Which number belongs to the pump and which to the module? |
| 6868318 (full number 34516868318) is the ABS pump number, and 6868319 is the ABS control module number. |
| Does the ABS module need coding after replacement? |
| Usually yes – after fitting, the module is coded with a diagnostic tool. The brake system must also always be bled. |
| What condition is this ABS unit in? |
| It is a used part in good working condition. The warranty period is shown in the product specification table. |
Not sure whether this unit fits your BMW? Send us photos of the pump and module labels and we will confirm compatibility.
