A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ABS pump Range Rover ATE BJ322C405AG 10021207874 10092632283 28526460123
Vendors's code: 10021207874
Product code: BJ322C405AG
Barcode:
Code 39:
ISBN:
£187.61
Price
£187.61
£230.76
Price
£230.76
Ask about the product
ABS pump Range Rover ATE BJ322C405AG 10021207874 10092632283 28526460123
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.08
-
shipping
(Poland)
from
£23.08
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find number BJ322C405AG on Range Rover ABS pumps
ABS pump BJ322C405AG complete with control unit, used and inspected. Compare the numbers with the original in your car.
Is ABS pump BJ322C405AG the right part for your Range Rover?
ABS pump BJ322C405AG for Range Rover is a used original module that regulates brake pressure when a wheel starts to lock up. It is matched by the numbers on its labels, not by the car model alone. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number BJ322C405AG and related numbers
The numbers as written on the labels and as a single string, the way catalogues list them:
- BJ322C405AG, original Range Rover number,
- 10.0212-0787.4 (catalogue format: 10021207874), hydraulic block manufacturer's number,
- 10.0926-3228.3 (catalogue format: 10092632283), control unit number,
- 28.5264-6012.3 (catalogue format: 28526460123), additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
When an ABS module needs replacing
- the ABS stops working, although basic braking usually remains functional,
- the brake pedal pulses or feels uneven for no obvious reason,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Does a lit ABS warning light always mean a faulty pump? |
|---|
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Want to be certain? Send us the numbers from the block and sticker on your ABS pump, and together we will check whether this part will fit.
