A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller AUDI 03L906019BC 0281016726 EDC17CP14
Vendors's code:
Product code: FB8A-583D0
Barcode:
Code 39:
ISBN:
1 626,02 zł
Price
1 626,02 zł
2 000,00 zł
Price
2 000,00 zł
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller AUDI 03L906019BC 0281016726 EDC17CP14
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ecu engine controller Audi 03L906019BC / 0281016726 EDC17CP14
The 03L906019BC / 0281016726 EDC17CP14 number is an Ecu engine controller for Audi, available in locked or unlocked versions – convenient to match and install.
What is the Audi Ecu engine controller 03L906019BC / 0281016726 / EDC17CP14?
This is an Ecu engine controller used in selected Audi models. The numbers 03L906019BC, 0281016726 and EDC17CP14 help match the correct controller to the vehicle.
What is the purpose of the Ecu engine controller 03L906019BC / 0281016726?
The Ecu engine controller marked 03L906019BC and 0281016726 manages engine operation, fuel injection and communication with other vehicle modules.
Do the numbers EDC17CP14, 03L906019BC and 0281016726 have to match?
Yes — matching numbers such as EDC17CP14, 03L906019BC and 0281016726 is the most reliable method of selecting the correct Audi Ecu engine controller.
Is the Ecu engine controller 03L906019BC / 0281016726 plug & play?
Not always. Controllers marked 03L906019BC and 0281016726 may require programming, adaptation or configuration to the specific vehicle.
In which variants is the Audi EDC17CP14 Ecu engine controller available?
Two variants are available: a locked Ecu engine controller and a logged-out Ecu engine controller (ready for reprogramming). Checking the variant before purchase is recommended.
For which engines does the Ecu engine controller 03L906019BC / 0281016726 / EDC17CP14 fit?
The numbers 03L906019BC, 0281016726 and EDC17CP14 were used in selected Audi power units. Matching by part number is the most accurate method.
Why search for an Ecu engine controller by number 03L906019BC or 0281016726?
Phrases such as 03L906019BC and 0281016726 allow quick selection without guessing by year or engine specification.
