A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller CITROEN 9653492680 0261207318
Vendors's code: 0261207318
Product code: 9653492680
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller CITROEN 9653492680 0261207318
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
0261207318 9653492680 – Bosch engine ECU for Citroën
Bosch engine ECU 0261207318 / 9653492680 used in selected Citroën models is responsible for proper engine operation, stable communication with the vehicle electronics, and accurate management of engine parameters.
FAQ – Citroen Engine ECU 9653492680 / Bosch 0261207318
Is the 9653492680 engine ECU compatible only with Citroen vehicles?
The part number 9653492680 is mainly associated with an engine ECU used in selected Citroen models. Before purchasing, it is also important to compare the Bosch number 0261207318, as this helps confirm exact compatibility with the vehicle and engine configuration.
Why is it important to verify the Bosch number 0261207318 when buying an ECU?
The reference 0261207318 identifies the Bosch engine controller version and helps avoid compatibility issues. Even visually identical modules may contain different software versions, so matching the numbers from the original unit is strongly recommended.
What is the difference between Citroen number 9653492680 and Bosch number 0261207318?
9653492680 is the vehicle manufacturer’s reference number, while 0261207318 is the Bosch production number assigned to the electronic module itself. Both references may correspond to the same ECU, which is why they are commonly listed together.
Does the 9653492680 engine ECU require programming?
Depending on the vehicle version, the ECU may require coding, immobilizer synchronization, or adaptation to the car. The exact procedure depends on the electronic configuration of the vehicle and should be verified before installation.
How can I make sure that ECU 0261207318 is the correct replacement?
The safest solution is to compare all numbers shown on the original module, especially 0261207318 and 9653492680. Matching references significantly improve the chances of correct installation and proper engine communication.
Can this ECU be used to replace a damaged engine controller?
Yes, the Citroen engine ECU 9653492680 Bosch 0261207318 is commonly used as a replacement for faulty engine controllers affected by communication errors, internal ECU failures, or engine starting problems, provided the part numbers are compatible.
