A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller CHEVROLET LACETTI 1.6 96422396 5WY1E03F
Vendors's code: 5WY1E03F
Product code: 96422396
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose the right engine ECU for Chevrolet Lacetti?
Looking for an engine controller for Chevrolet Lacetti 1.6? Compare the OEM number 96422396 and the designation 5WY1E03F with the label of your current module.
The offered original used controller has been checked and tested. The product comes with a 6-month warranty. Before ordering, ensure that the part numbers match, then order online at Auto24Parts.
Selecting the ECU based on identification numbers
The engine controller, also known as the ECU, is responsible for electronically managing the engine's operation. When replacing this component, it is crucial to choose the correct version, as modules that look similar may have different software or configurations.
The offered controller is identified by numbers 96422396 and 5WY1E03F.
Check the markings before purchasing
The most reliable starting point is to compare the full numbers from the old controller with the markings provided in the offer. Pay attention to all letters and numbers, as even a small difference may indicate a different version of the device.
What to know before replacing the ECU?
Before installation, check the controller's compatibility with the car's configuration. Depending on the device version and vehicle security, programming or adaptation to the immobilizer may be necessary. Do not assume that every used unit will work without additional configuration.
If you are unsure whether the selected controller will be suitable, contact the seller before purchasing. A photo of the old module's label with visible numbers will help verify compatibility.
The product is offered as an original, used part after checking and testing, with a 6-month warranty.
FAQ – Frequently asked questions about the Chevrolet Lacetti engine controller
Does the 96422396 controller fit every Chevrolet Lacetti 1.6?
Do not assume compatibility with all versions. Compare the number 96422396 with your car's data.
Does a used engine controller require adaptation?
Programming or adaptation to the immobilizer may be necessary, depending on the module version. It is worth determining the requirements before installation.
What if the numbers on my controller partially differ?
Do not order a part based solely on a similar number. Send the seller a photo of the old controller's label and ask for confirmation of compatibility before purchasing.