Vendors's code: G1T18772
Product code: MR388802
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Tested ECU engine controller for the Mitsubishi Carisma 1.8 GDI, part numbers MR388802 and G1T18772 H2 – covered by warranty with fast shipping.
The ECU engine controller MITSUBISHI CARISMA 1.8 GDI MR388802 G1T18772 H2 was fitted in Mitsubishi Carisma models equipped with the 1.8 GDI direct-injection petrol engine (engine code 4G93). This module manages engine operation and communicates with the vehicle's electronic systems.
The G1T18772 H2 control unit is found primarily in the Mitsubishi Carisma with 1.8 GDI engines manufactured between 1995 and 2004.
The engine control unit MR388802 for the Mitsubishi Carisma 1.8 GDI manages all critical engine parameters including fuel injection, ignition timing and sensor data processing. It also coordinates communication with other electronic systems in the vehicle.
The ECU G1T18772 ensures smooth engine performance, responsive acceleration and reliable operation both in city traffic and on longer journeys.
A defective engine controller G1T18772 H2 in the Mitsubishi Carisma 1.8 GDI can cause starting difficulties, rough idling or noticeable power loss while driving. In some cases diagnostic communication errors or immobiliser issues may also appear.
Every ECU MR388802 is inspected and tested before dispatch, so you receive a fully verified product backed by warranty and fast delivery.
The part number MR388802 ensures that the engine controller matches the specific version of your Mitsubishi Carisma 1.8 GDI. Even visually identical modules may run different software or have a different internal configuration.
Before purchasing the G1T18772 H2 unit, always compare every marking on the original module installed in your vehicle.
Depending on the vehicle variant, the engine controller MITSUBISHI CARISMA 1.8 GDI MR388802 G1T18772 H2 may require adaptation or programming after installation. This applies especially to units linked to the immobiliser and vehicle security systems.
Matching part numbers greatly simplifies fitting and helps ensure correct vehicle operation after the ECU replacement.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
