Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine controller OPEL ASTRA H MERIVA GM 55591495 ABKJ DELPHI 55579719
Vendors's code: 55579719
Product code: 55591495
Barcode:
Code 39:
ISBN:
813,01 zł
Price
813,01 zł
without VAT
Regular price:
813,01 zł
-0%
1 000,00 zł
Price
1 000,00 zł
Regular price:
1 000,00 zł
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine controller OPEL ASTRA H MERIVA GM 55591495 ABKJ DELPHI 55579719
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller OPEL ASTRA H MERIVA GM 55591495 ABKJ DELPHI 55579719
Which Opel models are compatible with the GM 55591495 ABKJ Delphi 55579719 ECU?
The ECU Engine controller OPEL ASTRA H MERIVA GM 55591495 ABKJ manufactured by Delphi under number 55579719 was used in selected engine versions of the Opel Astra H and Opel Meriva. The GM number 55591495 is the vehicle manufacturer's reference assigned by Opel, while 55579719 is the Delphi catalogue number as the ECU module manufacturer.
The identification code ABKJ specifies the exact software calibration version loaded into the controller, making this code's match with the original essential for correct module integration with the vehicle electronics.
What is the difference between GM number 55591495 and Delphi number 55579719?
Both numbers refer to the same physical ECU module. The number 55591495 is the Opel/GM reference used when ordering parts through dealerships and service centres, while Delphi number 55579719 appears directly on the controller housing as the electronics manufacturer's marking.
When buying a replacement for Opel Astra H or Meriva, it is worth checking both numbers on the original module in the car to ensure software version ABKJ compatibility.
What symptoms may indicate a fault in the Delphi 55579719 controller in Opel Astra H?
A faulty ECU module 55591495 ABKJ in Opel Astra H or Meriva may cause engine start problems, rough idling, unexpected stalling during driving, or OBD diagnostic errors appearing without any obvious mechanical cause.
Every Delphi 55579719 controller we offer undergoes full electrical testing before dispatch, ensuring the customer receives a verified product with warranty and fast courier delivery.
Where can I find the 55579719 number and ABKJ code on the Delphi module?
The Delphi manufacturer number 55579719 is printed on the label on the controller housing. The GM number 55591495 usually appears alongside it as the vehicle reference, while the ABKJ code identifies the software calibration version inside the module.
Before purchasing a controller for Opel Astra H or Meriva, always compare all markings with those on the original module fitted in your car to avoid software mismatches.
Does the GM 55591495 ABKJ Delphi 55579719 ECU require programming after replacement?
Depending on the version and equipment of your Opel Astra H or Meriva, the ECU module 55591495 may require immobilizer adaptation or VIN coding using a diagnostic tool after installation.
Using a controller with the identical Delphi number 55579719 and ABKJ code simplifies the entire procedure and reduces the time needed to start the car after replacing the ECU module.
