Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine controller OPEL VECTRA 1.8 DELCO 16204839GM D95002 BLBH
Vendors's code: D95002
Product code: 16204839GM
Barcode:
Code 39:
ISBN:
£32.36
Price
£32.36
without VAT
Regular price:
£32.36
-0%
£39.80
Price
£39.80
Regular price:
£39.80
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine controller OPEL VECTRA 1.8 DELCO 16204839GM D95002 BLBH
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.88
-
shipping
(Poland)
from
£23.88
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller OPEL VECTRA 1.8 DELCO 16204839GM D95002 BLBH
Which Opel Vectra models are compatible with ECU 16204839GM?
The ECU Engine controller OPEL VECTRA 1.8 DELCO 16204839GM was used in Opel Vectra B models equipped with 1.8-liter petrol engines. This module is responsible for managing engine performance, ensuring optimal power delivery and smooth operation.
What is the function of the Opel ECU marked D95002?
The D95002 engine controller manages the fuel injection system and ignition timing. The computer analyzes sensor signals in real-time, resulting in stable idling and smooth throttle response in your vehicle.
What are the symptoms of a faulty BLBH module in Opel Vectra 1.8?
A damaged engine computer 16204839GM or a module with the BLBH code may result in starting issues, sudden stalling, or a check engine light. Every ECU unit we offer is technically verified before shipment.
Why is the part number 16204839GM important for replacement?
Verifying the 16204839GM number and D95002 code ensures a perfect match for your Opel's specific engine hardware. Using the identical part number guarantees full compatibility with the factory electrical harness.
Does the OPEL VECTRA 16204839GM engine controller require programming?
In most cases, the ECU Engine controller OPEL VECTRA 1.8 DELCO 16204839GM D95002 requires pairing with the vehicle's immobilizer system. Matching the part by BLBH numbers facilitates installation and correct operation.
