Vendors's code:
Product code: 1117-23130
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ecu engine controller 21647072-1, also known as 216470721, HOMS2000-2A, S20002A and 9644625680-00, is a matched part for Peugeot 206 1.4 that ensures smooth and stable engine operation during everyday driving.
The Ecu engine controller 21647072-1 is responsible for the correct operation of the 1.4 engine in the Peugeot 206. It controls vehicle start-up, stable operation of the power unit, and the car’s response to the accelerator pedal during everyday driving.
The engine controller 216470721 by SAGEM is an electronic module that collects data from sensors and, based on this information, manages engine operation. Thanks to it, the Peugeot 206 operates smoothly and predictably.
Yes, the markings HOMS2000-2A and S20002A refer to the same type of Ecu engine controller used in the Peugeot 206 1.4. They differ only in the notation format.
The number 9644625680-00 is the vehicle manufacturer’s designation that identifies the engine controller used in the Peugeot 206. It appears interchangeably with other numbers of the same module.
Yes, the number 9644235680 is an alternative designation of the same engine controller, which also appears under the numbers 21647072-1 and 9644625680-00.
The engine controller HOMS2000-2A was installed in the Peugeot 206 with the 1.4 engine. Exact compatibility depends on the model year and equipment version, therefore it is recommended to check the vehicle VIN before purchase.
A damaged engine controller S20002A may cause starting problems, uneven engine operation, the check engine warning light to illuminate, or a loss of power while driving.
In many cases, the engine controller 216470721 requires matching to the vehicle immobiliser. The store offers two variants: the engine controller in a locked or unlocked version. Before choosing, it is worth reviewing the variant descriptions.
If the number 9644235680 matches the original controller installed in the vehicle, installation is carried out without mechanical modifications. Choosing the correct controller variant is essential.
Selecting the engine controller by the HOMS2000-2A designation ensures compatibility with the vehicle’s electrical system and correct, stable operation of the 1.4 engine in the Peugeot 206.
The engine controller 21647072-1 in the locked version requires immobiliser programming, while the unlocked version is prepared for easier installation in the vehicle. Details of the differences are described in the store variants.
Yes, the number 21647072-1 is the original designation of a SAGEM Ecu engine controller used in the Peugeot 206 1.4, which guarantees safe and correct operation of the power unit.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
