A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller ALFA ROMEO 145 146 1.4 16V BOSCH 0261204480 00464808240
Vendors's code: 00464808240
Product code: 21CE-637AD
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller ALFA ROMEO 145 146 1.4 16V BOSCH 0261204480 00464808240
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 145 146 1.4 16V Bosch 0261204480 00464808240
The engine control unit for Alfa Romeo 145 and 146 1.4 16V Bosch with part numbers 0261204480 and 00464808240 is a practical solution for replacement or failure – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What is the Alfa Romeo 145 146 1.4 16V engine ECU BOSCH 0261204480?
The Ecu engine controller BOSCH 0261204480 in the Alfa Romeo 145 and 146 with the 1.4 16V engine is responsible for proper and smooth engine operation. It directly affects driving comfort and stable vehicle behavior during everyday use.
Which models does the engine ECU 00464808240 BOSCH fit?
The Ecu engine controller BOSCH with part number 00464808240 is used in the Alfa Romeo 145 and Alfa Romeo 146 models equipped with the 1.4 16V engine. Before purchasing, it is always recommended to compare the part number with the one originally installed in the vehicle.
Does the Alfa Romeo 145 146 1.4 16V engine ECU 0261204480 require programming?
In many cases, the Ecu engine controller 0261204480 for the Alfa Romeo 145 and 146 1.4 16V may require adaptation to the specific vehicle. This ensures correct cooperation between the ECU and the remaining vehicle systems.
What symptoms can a faulty 00464808240 ECU cause in the Alfa Romeo 145 or 146?
A damaged Ecu engine controller 00464808240 in the Alfa Romeo 145 or 146 1.4 16V may cause difficulties starting the engine, uneven operation or a noticeable loss of power. Warning lights often appear as well.
Is a used BOSCH 0261204480 engine ECU a good solution?
A used Ecu engine controller BOSCH 0261204480 for the Alfa Romeo 145 and 146 1.4 16V is a popular choice that helps reduce repair costs. A properly tested unit can operate just as reliably as a new one.
