The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ECU Engine Controller ALFA ROMEO 145 146 2.0 16V BOSCH 0261204478 00465251680 0 046 525 168 0 003
Vendors's code: 00465251680
Product code: 2491-56531
Barcode:
Code 39:
ISBN:
406,50 zł
Price
406,50 zł
500,00 zł
Price
500,00 zł
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller ALFA ROMEO 145 146 2.0 16V BOSCH 0261204478 00465251680 0 046 525 168 0 003
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 0261204481 00464548050
The engine control unit for Alfa Romeo with part numbers 0261204481 and 00464548050 is a well-matched solution for replacement or failure – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What is the Alfa Romeo 145 146 2.0 16V engine ECU BOSCH 0261204478?
The Ecu engine controller BOSCH 0261204478 in the Alfa Romeo 145 and 146 with the 2.0 16V engine is responsible for proper and stable engine operation. It ensures smooth driving and correct engine response during everyday use.
Which models does the engine ECU 00465251680 fit?
The Ecu engine controller with part number 00465251680 is used in the Alfa Romeo 145 and 146 models with the 2.0 16V engine. It is essential to compare the part number with the one found on the original ECU.
Does the Alfa Romeo 145 146 2.0 16V engine ECU 0 046 525 168 require programming?
In many cases, the Ecu engine controller 0 046 525 168 for the Alfa Romeo 145 and 146 2.0 16V requires adaptation to the specific vehicle. This allows correct cooperation with the vehicle’s systems.
What symptoms can a faulty 0 003 ECU cause in the Alfa Romeo 146?
A damaged Ecu engine controller marked as 0 003 in the Alfa Romeo 146 2.0 16V may cause starting problems, uneven engine operation or a loss of power. Warning lights often appear as well.
Is a used BOSCH 0261204478 engine ECU a good choice?
A used Ecu engine controller BOSCH 0261204478 for the Alfa Romeo 145 and 146 2.0 16V is a popular option to reduce repair costs. A tested unit can work just as reliably as a new one.
How can I check if the engine ECU 00465251680 fits my Alfa Romeo 145?
To make sure the Ecu engine controller 00465251680 is suitable for the Alfa Romeo 145 2.0 16V, it is best to compare the part number with the marking on the housing of the old ECU.
Is the Alfa Romeo 145 146 2.0 16V BOSCH engine ECU available in different variants?
Yes, the BOSCH Ecu engine controller for the Alfa Romeo 145 and 146 2.0 16V is available in two variants: a locked engine ECU or a virgin version. Before purchasing, it is worth reviewing the variant descriptions.
Why is the part number 0261204478 so important when choosing an ECU?
The part number 0261204478 clearly identifies the BOSCH Ecu engine controller intended for the Alfa Romeo 145 and 146 2.0 16V. Matching the correct number is essential for proper operation after installation.
Does replacing the 0 046 525 168 ECU improve engine performance in Alfa Romeo?
Replacing the Ecu engine controller 0 046 525 168 in the Alfa Romeo 145 and 146 2.0 16V often restores smooth engine operation, stable RPM and improved driving comfort.
What should be checked before buying the BOSCH 00465251680 engine ECU?
Before purchasing the BOSCH Ecu engine controller 00465251680 for the Alfa Romeo 145 and 146 2.0 16V, it is worth checking the part number, available variant and detailed product description. This is the easiest way to avoid mistakes.
