A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 147 1.9 JTD 0281010332 73501227 93741WAA 28SA5661
Vendors's code: 73501227
Product code: 8C4C-106C5
Barcode:
Code 39:
ISBN:
£43.97
Price
£43.97
Regular price:
£43.97
0%
£54.08
Price
£54.08
Regular price:
£54.08
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 147 1.9 JTD 0281010332 73501227 93741WAA 28SA5661
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.18
-
shipping
(Poland)
from
£23.18
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 147 1.9 JTD 0281010332 73501227 93741WAA 28SA5661
The engine control unit for Alfa Romeo 147 1.9 JTD with part numbers 0281010332, 73501227, 93741WAA and 28SA5661 is a proven solution when replacing a damaged module – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What does number 0281010332 mean in the Alfa Romeo 147 1.9 JTD engine control unit?
The number 0281010332 identifies a specific engine control unit designed for the Alfa Romeo 147 with the 1.9 JTD engine. This manufacturer code allows precise matching of the module to the correct engine configuration.
Will engine control unit 73501227 fit my Alfa Romeo 147?
To confirm compatibility of ECU 73501227, compare the number with the marking on the original module installed in your vehicle. Full number consistency is essential for proper engine operation.
Why do the markings 93741WAA and 28SA5661 appear in the description?
The numbers 93741WAA and 28SA5661 are additional identifiers specifying the ECU version. Together with 0281010332 and 73501227, they clearly define the correct module for Alfa Romeo 147 1.9 JTD.
What is the role of engine computer 0281010332 in the 147 1.9 JTD?
The 0281010332 ECU manages engine operation by controlling fuel injection parameters and overall engine settings. It ensures stability, performance and proper driving response.
What symptoms may indicate a problem with module 73501227?
Rough running, power loss, starting difficulties or error messages may indicate a fault in ECU 73501227.
Why is the exact number 93741WAA important when purchasing?
ECUs may look identical but differ in configuration. The marking 93741WAA must match your original unit to ensure compatibility.
Does ECU 28SA5661 require adaptation after installation?
In many cases, ECU 28SA5661 may require adaptation or coding after installation. It is recommended to verify this before fitting.
How to check compatibility of ECU 0281010332 with my Alfa Romeo 147?
Compare all markings – 0281010332, 73501227, 93741WAA and 28SA5661 – with the numbers on your old module.
Why search for the part by number 73501227 or 0281010332?
Entering the exact number 73501227 or 0281010332 allows you to quickly find the correct ECU for Alfa Romeo 147 1.9 JTD.
What should you check before ordering ECU 93741WAA?
Before purchase, ensure that all numbers – 0281010332, 73501227, 93741WAA and 28SA5661 – fully match your module markings.
