A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 155 2.5 TDI 0281001191
Vendors's code:
Product code: 849C-694F7
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 155 2.5 TDI 0281001191
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.19
-
shipping
(Poland)
from
£23.19
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 155 2.5 TDI 0281001191
The engine control unit for Alfa Romeo 155 2.5 TDI with part number 0281001191 is a proven solution for replacement or failure – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What does number 0281001191 mean in the Alfa Romeo 155 2.5 TDI engine control unit?
The number 0281001191 identifies a specific engine control unit used in the Alfa Romeo 155 with the 2.5 TDI diesel engine. This manufacturer designation allows precise matching of the module to the correct engine version.
Will engine control unit 0281001191 fit every Alfa Romeo 155 2.5 TDI?
ECU 0281001191 was installed in specific 2.5 TDI engine configurations. To ensure compatibility, compare the number with the marking on the original module in your vehicle.
What is the function of engine computer 0281001191?
ECU 0281001191 controls the operating parameters of the 2.5 TDI engine, including fuel injection and overall engine management settings. It directly affects performance and driving stability.
What symptoms may indicate a problem with ECU 0281001191?
Starting difficulties, rough engine operation, power loss or error messages may indicate a fault in module 0281001191.
Why is the exact number 0281001191 so important when purchasing?
ECUs may look similar but differ in configuration and software. The number 0281001191 must fully match your original unit to ensure compatibility with Alfa Romeo 155 2.5 TDI.
Does ECU 0281001191 require adaptation after installation?
Depending on the vehicle version, ECU 0281001191 may require adjustment after installation. It is recommended to verify this before fitting.
How can I check compatibility of ECU 0281001191 with my Alfa Romeo 155?
The best method is to compare number 0281001191 with the marking on your original module. Full number matching minimizes the risk of incorrect purchase.
Why search for the part by number 0281001191?
Entering the exact number 0281001191 allows you to quickly find the correct engine control unit for Alfa Romeo 155 2.5 TDI. It is the most precise selection method.
What should you check before ordering ECU 0281001191?
Before purchase, ensure that number 0281001191 fully matches your module marking. Number consistency guarantees proper installation and correct engine operation.
