A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 156 0261204732 00465399240 1277356195
Vendors's code: 1277356195
Product code: 708A-12817
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 156 0261204732 00465399240 1277356195
The engine control unit for Alfa Romeo 156 with part numbers 0261204732, 00465399240 and 1277356195 is a proven solution when replacing a damaged module – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What does number 0261204732 mean in the Alfa Romeo 156 engine control unit?
Number 0261204732 identifies a specific engine control unit installed in selected versions of the Alfa Romeo 156. This manufacturer designation allows precise matching of the ECU to the correct vehicle configuration.
Will engine control unit 00465399240 be suitable for my Alfa Romeo 156?
To confirm compatibility, compare number 00465399240 with the marking found on the original module in your vehicle. Full number consistency is crucial when replacing the engine control unit.
Why is number 1277356195 also listed?
Number 1277356195 identifies the production version or configuration of the ECU. Together with numbers 0261204732 and 00465399240, it clearly defines the correct module model.
What is the function of ECU 0261204732 in the 156 model?
Engine control unit 0261204732 manages engine operating parameters – it controls fuel injection, ignition and other settings affecting performance and fuel consumption.
What symptoms may indicate a faulty ECU 00465399240?
Difficulty starting, rough engine operation, power loss or an illuminated check engine light may indicate a malfunction of module 00465399240.
Why is matching number 0261204732 so important when purchasing?
ECUs may look identical but differ in configuration and software. Matching numbers 0261204732, 00465399240 and 1277356195 minimizes the risk of incorrect fitment.
In which version is engine control unit 0261204732 available?
Two variants are available in the store: a locked engine control unit or a virgin (unlocked) version. Before choosing, review the variant descriptions to select the correct option for your vehicle.
Does ECU 1277356195 require adaptation after installation?
Depending on the selected variant, adaptation to the vehicle may be necessary. It is advisable to check before installation whether additional programming is required.
How can I check compatibility of ECU 00465399240 with my Alfa Romeo 156?
The best solution is to compare all numbers – 0261204732, 00465399240 and 1277356195 – with the markings found on your original module. This is the safest way to avoid purchasing the wrong part.
What should you check before ordering ECU 0261204732?
Before purchase, make sure that all numbers fully match your original module. Number consistency guarantees proper installation and correct engine operation.