A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 156 1.9 JTD 0281010020 46739031 C414B932
Vendors's code: 46739031
Product code: 322D-12940
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 156 1.9 JTD 0281010020 46739031 C414B932
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.19
-
shipping
(Poland)
from
£23.19
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 156 1.9 JTD 0281010020 46739031 C414B932
The engine control unit for Alfa Romeo 156 1.9 JTD with part numbers 0281010020, 46739031 and C414B932 is a proven solution when replacing a damaged module – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What does number 0281010020 mean in the Alfa Romeo 156 1.9 JTD engine control unit?
The number 0281010020 identifies a specific engine control unit used in the Alfa Romeo 156 with the 1.9 JTD engine. This manufacturer designation allows precise matching of the ECU to the correct vehicle version.
Will engine control unit 46739031 fit my Alfa Romeo 156?
To confirm compatibility, compare number 46739031 with the marking found on the original module in your vehicle. Full number matching is essential for proper engine operation.
Why does the description also include C414B932?
Code C414B932 is an additional marking identifying the ECU software version. Together with numbers 0281010020 and 46739031, it helps precisely determine the correct module.
What is the function of ECU 0281010020 in the 156 1.9 JTD?
Engine control unit 0281010020 manages diesel engine operation – controlling fuel injection and parameters affecting performance and fuel consumption.
What symptoms may indicate a faulty ECU 46739031?
Starting problems, rough engine operation, power loss or a check engine light may indicate a defect in module 46739031.
Does code C414B932 need to match when replacing the engine control unit?
Yes, matching C414B932 increases certainty of proper compatibility. Even if the housing looks identical, different numbers may indicate a different configuration.
In which versions is engine control unit 0281010020 available?
Two variants are available in the store: a locked engine control unit or a virgin (unlocked) version. Before choosing, please review the variant descriptions to select the correct option for your vehicle.
Does ECU 46739031 require programming after installation?
Depending on the selected variant (locked or virgin), adaptation to the vehicle may be required. It is recommended to verify this before installation.
Why search for the part by number 0281010020?
Entering the exact number 0281010020 allows you to quickly find the correct engine control unit for Alfa Romeo 156 1.9 JTD. It is the most reliable selection method.
What should you check before ordering ECU 46739031?
Before purchase, ensure that markings 0281010020, 46739031 and C414B932 fully match your original module. Number consistency guarantees proper installation and correct engine operation.
