A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 156 2.5 V6 0261204705 46469349
Vendors's code: 46469349
Product code: 05B6-79419
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 156 2.5 V6 0261204705 46469349
The Ecu engine controller for Alfa Romeo 156 2.5 V6 with part numbers 0261204705 and 46469349 is responsible for proper engine operation – before purchasing, check the variant description because the engine controller is available in a locked or virgin version.
What do the numbers 0261204705 and 46469349 mean in the Alfa Romeo 156 2.5 V6 engine control module?
The numbers 0261204705 and 46469349 identify a specific engine control module used in the Alfa Romeo 156 with a 2.5 V6 engine. These designations allow you to accurately match the module to your vehicle and avoid mistakes when purchasing parts.
Does the Alfa Romeo 156 2.5 V6 0261204705 engine control module fit instead of 46469349?
In many cases, the numbers 0261204705 and 46469349 refer to the same type of engine control module used in the Alfa Romeo 156 2.5 V6. When replacing, it is important to compare all markings on the module to ensure full compatibility.
How to check if the 46469349 engine control module fits my Alfa Romeo 156?
The easiest way is to check the numbers on your current module. If the module shows 0261204705 or 46469349, it means the engine control module is compatible with the Alfa Romeo 156 2.5 V6 and can be used as a replacement.
Why are the numbers 0261204705 and 46469349 important when choosing an engine control module?
Part numbers uniquely identify the model of the engine control unit. This ensures you select the correct module for the Alfa Romeo 156 2.5 V6 and guarantees compatibility with the vehicle's electronics.
Can replacing the 0261204705 module solve engine performance issues?
If the engine control module fails, replacing it with a module numbered 0261204705 or 46469349 often restores proper engine operation. The ECU controls many engine functions, so its proper functioning is critical for vehicle performance.
When is the 46469349 engine control module replaced in the Alfa Romeo 156 2.5 V6?
The module with numbers 0261204705 and 46469349 is usually replaced in case of electronic failures, starting issues, or engine malfunctions. Matching the part by number ensures the correct ECU is chosen for the Alfa Romeo 156.
What variants of the Alfa Romeo 156 2.5 V6 0261204705 46469349 engine control module are available?
In our store, the Alfa Romeo 156 2.5 V6 engine control module with numbers 0261204705 and 46469349 is available in two variants: locked or unlocked. Before purchasing, check the variant descriptions to select the best option for your car.