A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 159 1.9 JTS 0261S01041 00552049240 MED761A002 1039S12735
Vendors's code: 00552049240
Product code: F243-423C0
Barcode:
Code 39:
ISBN:
£187.61
Price
£187.61
£230.76
Price
£230.76
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 159 1.9 JTS 0261S01041 00552049240 MED761A002 1039S12735
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.08
-
shipping
(Poland)
from
£23.08
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ecu engine controller Alfa Romeo 159 1.9 JTS 0261S01041 00552049240 MED761A002 1039S12735
Ecu engine controller with part numbers 0261S01041, 00552049240, MED761A002 and 1039S12735 for Alfa Romeo 159 1.9 JTS is a reliable replacement solution – available in locked or virgin version, check the description before choosing.
Is the engine controller 0261S01041 compatible with Alfa Romeo 159 1.9 JTS?
The engine controller with part numbers 0261S01041, 00552049240, MED761A002 and 1039S12735 is used in Alfa Romeo 159 with the 1.9 JTS engine. It is responsible for managing engine operation and ensuring its proper performance. In our store, two variants are available: the engine controller in locked or logged-out version – before choosing, please review the variant descriptions.
What do the numbers MED761A002 and 00552049240 mean in the engine controller?
The numbers MED761A002 and 00552049240, as well as 0261S01041 and 1039S12735, identify a specific engine controller installed in Alfa Romeo 159 1.9 JTS. They allow proper matching of the unit to the vehicle. We offer the engine controller in locked or logged-out version – details can be found in the product description.
Does the Alfa Romeo 159 engine controller with number 1039S12735 require adaptation?
When replacing the engine controller 1039S12735 or 0261S01041, adaptation to the vehicle may be necessary. The scope depends on the selected variant. In the store, the engine controller is available in locked and logged-out version – before purchasing, check the description.
Which engine is the engine controller 00552049240 suitable for?
The engine controller marked with number 00552049240, also appearing as MED761A002 and 0261S01041, is designed for Alfa Romeo 159 with the 1.9 JTS engine. It is a module controlling the operation of the power unit. We offer two variants: locked or logged-out engine controller – we encourage you to review the description before choosing.
How to check compatibility of the engine controller MED761A002 with the vehicle?
To confirm compatibility, compare the number MED761A002, 1039S12735 or 0261S01041 with the engine controller currently installed in the vehicle. Matching numbers confirm proper compatibility with Alfa Romeo 159 1.9 JTS. In our store, two variants are available: engine controller in locked and logged-out version – details can be found in the product description.
