A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 164 2.5 TDI 0281001237
Vendors's code:
Product code: 6972-959FC
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 164 2.5 TDI 0281001237
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.19
-
shipping
(Poland)
from
£23.19
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 164 2.5 TDI 0281001237
The Ecu engine controller with part number 0281001237 for Alfa Romeo 164 2.5 TDI is a proven replacement solution — before purchasing, review the description as the engine controller is available in locked or virgin versions.
Is engine control unit 0281001237 compatible with Alfa Romeo 164 2.5 TDI?
The engine control unit with part number 0281001237 is used in Alfa Romeo 164 with the 2.5 TDI engine and ensures reliable daily operation. In our store, two variants are available: the engine control unit in locked or virgin version – make sure to check the description of available options before choosing.
What function does engine control unit 0281001237 serve in Alfa Romeo 164 2.5 TDI?
The engine control unit 0281001237 manages the operation of the power unit, affecting its smoothness and stability during driving. In Alfa Romeo 164 2.5 TDI, it is a key element responsible for the vehicle’s daily performance. We offer it in locked or virgin version – check the variant description before purchase.
Does part number 0281001237 help match the engine control unit to Alfa Romeo 164?
Yes – part number 0281001237 allows precise matching of the correct engine control unit to Alfa Romeo 164 2.5 TDI. When replacing a damaged module, the part number ensures proper compatibility. In our store, two variants are available: locked or virgin – please review the description before choosing.
When should engine control unit 0281001237 be replaced in Alfa Romeo 164 2.5 TDI?
Replacement may be necessary if the vehicle experiences starting issues or uneven engine performance. In Alfa Romeo 164 2.5 TDI, it ensures smooth operation of the power unit. We offer it in locked or virgin version – check the details before purchasing.
Why is part number 0281001237 important when buying an engine control unit?
Part number 0281001237 ensures that the selected engine control unit is compatible with Alfa Romeo 164 2.5 TDI. This is a simple way to avoid compatibility issues. Our store offers both locked and virgin variants – review the description before making your choice.
