A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo 166 2.4 JTD 0281001787
Vendors's code:
Product code: 65D9-60043
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo 166 2.4 JTD 0281001787
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 166 2.4 JTD 0281001787
The Ecu engine controller with part number 0281001787 for Alfa Romeo 166 2.4 JTD is a practical replacement solution — before purchasing, check the description as the engine controller is available in locked or virgin versions.
Is engine control unit 0281001787 compatible with Alfa Romeo 166 2.4 JTD?
The engine control unit with part number 0281001787 is used in Alfa Romeo 166 with a 2.4 JTD engine and ensures proper daily operation. In our store, two variants are available: engine control unit in locked or virgin version – check the variant description before purchase.
What function does engine control unit 0281001787 serve in Alfa Romeo 166 2.4 JTD?
The engine control unit 0281001787 manages the power unit, ensuring smooth and stable driving. In Alfa Romeo 166 2.4 JTD, it is a key component responsible for the vehicle’s daily operation. Available in locked or virgin version – check the variant description before purchase.
Does part number 0281001787 help match the correct engine control unit for Alfa Romeo 166?
Yes – part number 0281001787 allows precise matching of the correct engine control unit for Alfa Romeo 166 2.4 JTD. When replacing a damaged module, this information is essential to avoid compatibility issues. Two variants are offered: locked or virgin – check the description before choosing.
When should engine control unit 0281001787 be replaced?
Replacement may be necessary if there are problems starting the vehicle or if engine operation is uneven. In Alfa Romeo 166 2.4 JTD, it ensures stable performance of the power unit. Available in locked or virgin version – check details before purchase.
Why is part number 0281001787 important when buying an engine control unit?
Part number 0281001787 ensures that the selected engine control unit will be compatible with Alfa Romeo 166 2.4 JTD. This is a simple way to correctly match the part and avoid mistakes. Available in locked or virgin version – check the variant description before purchase.
