A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo Alfetta 2.0 0261200044
Vendors's code: 0261200044
Product code: 29FA-6214D
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo Alfetta 2.0 0261200044
The Ecu engine controller for Alfa Romeo Alfetta 2.0 with part number 0261200044 ensures proper engine operation – available in locked or virgin version, check the description before purchasing.
What does the number 0261200044 mean in the engine control module of Alfa Romeo Alfetta 2.0?
The number 0261200044 identifies a specific engine control module used in the Alfa Romeo Alfetta 2.0. It helps check part compatibility with the vehicle and ensures the engine control module will fit your Alfetta.
Does the Alfa Romeo Alfetta 2.0 0261200044 engine control module fit all Alfetta versions?
The engine control module with number 0261200044 is intended for a specific version of the Alfetta 2.0 model. Checking the part number on your current module ensures the replacement will be suitable for your car.
How to check if the 0261200044 engine control module fits my car?
Simply compare the number 0261200044 on the new module with the one on your existing module. If the numbers match, the engine control module will be compatible with the Alfa Romeo Alfetta 2.0.
Why is the number 0261200044 important when buying an engine control module?
The part number 0261200044 clearly identifies the model of the engine control module. This prevents mistakes when purchasing and ensures the module will be fully compatible with your vehicle.
Can replacing the 0261200044 module improve engine performance?
In case of electronic issues or engine malfunctions, replacing the Alfa Romeo Alfetta 2.0 0261200044 engine control module often restores proper engine operation, improving stability and efficiency.
When should the 0261200044 engine control module be replaced?
Replacement of the 0261200044 module is recommended in case of electronic failures, starting issues, or engine performance problems. Choosing the module by part number guarantees compatibility with the Alfa Romeo Alfetta 2.0.
What variants of the Alfa Romeo Alfetta 2.0 0261200044 engine control module are available?
In our store, the Alfa Romeo Alfetta 2.0 0261200044 engine control module is available in two variants: locked or unlocked. Before purchasing, check the description of the variants to choose the one best suited to your car.