A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine control module Audi 0281015766 4H0907409 EDC17CP24
Vendors's code:
Product code: 7488-62309
Barcode:
Code 39:
ISBN:
€569.11
Price
€569.11
Regular price:
€569.11
0%
€700.00
Price
€700.00
Regular price:
€700.00
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine control module Audi 0281015766 4H0907409 EDC17CP24
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control module Audi 0281015766 4H0907409 EDC17CP24
The engine control module with part numbers 0281015766 and 4H0907409 EDC17CP24 for Audi is a proven component for managing engine operation, available in either locked or unlocked variants.
Does the 0281015766 engine control unit fit Audi?
The engine control unit with number 0281015766 and designation 4H0907409 EDC17CP24 is used in Audi vehicles, especially models with 4.2 TDI engines, such as Audi A8 D4. If your current ECU has the same numbers, it indicates a very high compatibility and allows for easy replacement.
What does the number 4H0907409 mean in the 0281015766 ECU?
The number 4H0907409 is the Audi catalog code, which together with Bosch number 0281015766 accurately identifies the engine control unit. This ensures that you select the correct part for your specific vehicle model.
What does EDC17CP24 mean in the 0281015766 ECU?
EDC17CP24 is the Bosch ECU type used in modern diesel engines. It manages fuel injection, turbocharger operation, and emission control, directly affecting performance and fuel efficiency.
Does the 0281015766 ECU require programming?
The 0281015766 4H0907409 EDC17CP24 ECU may require adaptation to the vehicle. The store offers two variants: locked or logged out ECU, so it is recommended to review the description of variants before choosing the right option.
How to check if the 4H0907409 ECU will fit?
The best way is to compare the number 4H0907409 or 0281015766 with the one on your current ECU. Matching the numbers is the most reliable way to ensure the part is compatible with your Audi.
Why is the number 0281015766 important when choosing?
The number 0281015766 is a unique Bosch designation that clearly identifies the engine control unit. This helps avoid errors when purchasing and ensures you select the exact ECU model required for your car.
Is the EDC17CP24 0281015766 ready to install?
It depends on the variant. The ECU can be plug & play or may require programming and immobilizer adaptation. Therefore, before purchase, check whether you are selecting a locked or logged-out version.
What are the symptoms of a faulty 0281015766 ECU?
A faulty 0281015766 ECU can cause lack of communication with diagnostics, starting problems, CAN errors, or irregular engine operation. Sensor voltage errors or ECU communication issues are also common.
Does the number 4H0907409 appear under other designations?
Yes, 4H0907409 appears together with Bosch 0281015766 and type EDC17CP24. These are different designations of the same control unit used in Audi diesel engines.
What to pay attention to when buying the 0281015766 or 4H0907409 ECU?
The most important is matching the numbers (0281015766 or 4H0907409), checking the technical condition, and selecting the appropriate variant – locked or logged-out. This ensures the ECU will function properly after installation.
