A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Chevrolet Matiz 0.8 5WY5407A D32 96801800
Vendors's code: 5WY5407A
Product code: 96801800
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Chevrolet Matiz 0.8 5WY5407A D32 96801800
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.19
-
shipping
(Poland)
from
£23.19
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Chevrolet Matiz 0.8
Looking for an engine control unit for your Chevrolet Matiz 0.8? Ensure that OEM number 96801800 and identifier 5WY5407A match your current module.
This verified part comes with a 6-month warranty and fast shipping. Order now at Auto24Parts and buy with confidence.
Engine Control Unit Chevrolet Matiz 0.8 – 96801800
Dedicated ECU for Chevrolet Matiz with a 0.8 engine. It is crucial to compare the identification numbers from your old module's label before purchasing.
The offered unit includes identifiers 5WY5407A, D32, 96801800, 1BOT 9A. Using these numbers helps in finding a compatible part.
How to confirm ECU compatibility?
Before buying, compare the OEM number and manufacturer identifier with the label on your old ECU. The car model and engine capacity alone may not be sufficient to confirm compatibility.
Replacing the ECU may require programming or immobilizer adaptation. The necessary procedures depend on your vehicle's configuration. Check available variants before purchasing.
Part condition and warranty
The ECU is a used, original part that has been thoroughly tested. The product is covered by a 6-month warranty. Auto24Parts offers fast shipping.
FAQ – Questions and Answers
Does the 96801800 ECU fit every Chevrolet Matiz 0.8?
It is recommended to compare the number 96801800 and identifier 5WY5407A with your current module to confirm compatibility.
What does the number 5WY5407A mean?
This is the ECU's identification number. It should be checked along with the OEM number 96801800 to avoid purchasing the wrong part.
Is the D32 identifier important when selecting an ECU?
Yes, the D32 identifier provides additional identification. Compare it with the numbers on your module before purchasing.
Does a used ECU require programming?
Depending on the vehicle version and module configuration, programming or immobilizer adaptation may be necessary. Consult with a workshop before installation.
What if the numbers on my ECU differ?
Do not rely solely on the appearance of the part. Before purchasing, contact the seller, providing a photo of the label and ECU numbers to confirm compatibility.
