A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller CITROEN BOSCH 0 280 000 198 0280000198
Vendors's code: 0280000198
Product code: BCB5-282BA
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
Regular price:
325,20 zł
0%
400,00 zł
Price
400,00 zł
Regular price:
400,00 zł
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller CITROEN BOSCH 0 280 000 198 0280000198
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Citroen Bosch 0 280 000 198 0280000198
The engine control unit for Citroen Bosch with part numbers 0 280 000 198 and 0280000198 is a proven solution for replacement or failure – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What does the number 0 280 000 198 mean on a Citroen engine ECU?
The number 0 280 000 198 is a BOSCH manufacturer designation that identifies a specific Ecu engine controller used in selected Citroen models. This number determines whether the part is compatible with your vehicle.
Does the engine ECU 0280000198 fit my Citroen?
To confirm compatibility of the Ecu engine controller 0280000198, compare the number with the marking on the original module installed in your car. Matching the exact part number is the key condition for proper operation after installation.
What is the difference between 0 280 000 198 and 0280000198?
The numbers 0 280 000 198 and 0280000198 refer to the same BOSCH Ecu engine controller model, but the format may vary. When searching, it is worth checking both versions of the number.
Why is the exact part number 0280000198 so important?
Engine ECUs may look very similar but differ in configuration. That is why the number 0280000198 must be identical to the one on your original part – this guarantees proper cooperation with the engine.
What symptoms may indicate a failure of the 0 280 000 198 ECU?
Starting problems, uneven engine operation, no throttle response or an illuminated engine warning light may indicate a fault in module 0 280 000 198. Replacing it with a functional unit often restores correct vehicle operation.
Does the 0280000198 engine ECU require adaptation?
Depending on the Citroen model, the Ecu engine controller 0280000198 may require adaptation after installation. It is advisable to check whether additional configuration is necessary before fitting the unit.
How can I check compatibility of the 0 280 000 198 ECU with my car?
The best way is to compare the number 0 280 000 198 with the marking on the original Ecu engine controller. Matching all digits eliminates the risk of incorrect purchase.
Is the 0280000198 engine ECU available in different variants?
Yes, the Ecu engine controller 0280000198 may be available in different versions. The store offers two variants: a locked engine ECU or a virgin version, so before choosing it is worth reviewing the variant descriptions.
Why is it worth searching by the number 0 280 000 198?
Entering the exact number 0 280 000 198 into a search engine allows you to quickly find the correct engine ECU for Citroen. It is the most precise way to select the right part.
What should I check before ordering the 0280000198 ECU?
Before purchasing, verify the full part designation – both 0280000198 and 0 280 000 198 formats. Matching numbers are the foundation of trouble-free installation.
