A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller OPEL DELCO 16163479 BHPZ
Vendors's code: 16163479
Product code: BHPZ_16163479
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
Regular price:
487,80 zł
0%
600,00 zł
Price
600,00 zł
Regular price:
600,00 zł
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller OPEL DELCO 16163479 BHPZ
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ENGINE CONTROL UNIT OPEL DELCO 16163479BHPZ
Original Opel DELCO engine control unit with part number 16163479BHPZ, designed for quick and accurate vehicle compatibility matching.
Engine Control Unit OPEL DELCO 16163479 BHPZ
Which Opel models use the DELCO 16163479 BHPZ engine ECU?
The OPEL DELCO 16163479 BHPZ engine control module was installed in selected Opel models equipped with petrol engines. The unit is responsible for proper engine operation and communication with the vehicle’s electronic systems during everyday driving.
The 16163479 ECU is commonly found in vehicles such as the Opel Astra and Opel Corsa with 1.6 16V engines.
What is the function of the Opel 16163479 BHPZ engine control module?
The Opel DELCO 16163479 BHPZ engine control unit manages the essential engine functions. It controls fuel injection parameters, processes sensor data and communicates with other vehicle modules.
The BHPZ ECU helps maintain stable engine performance both in city traffic and on longer journeys.
What symptoms can a faulty Opel DELCO 16163479 ECU cause?
A damaged Opel 16163479 engine control unit may cause starting problems, unstable engine operation or reduced power while driving. In some cases, diagnostic communication errors may also appear.
The DELCO BHPZ ECU is tested before shipping, ensuring the customer receives a verified product with warranty and fast delivery.
Why is the 16163479 part number important when choosing an Opel ECU?
The 16163479 part number helps identify the correct engine control module for a specific Opel version. Even visually similar units may contain different software or technical configurations.
Before purchasing the Opel DELCO BHPZ ECU, it is recommended to compare all markings with the original module installed in the vehicle.
Can the OPEL DELCO 16163479 BHPZ ECU require programming?
Depending on the vehicle model, the OPEL DELCO 16163479 BHPZ engine control module may require adaptation or programming after installation. This mainly applies to ECUs linked to the immobilizer system.
Matching the correct part numbers significantly simplifies installation and helps ensure proper vehicle operation after replacing the ECU.
