A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller NISSAN MICRA MEC32110 D2
Vendors's code:
Product code: DF63-50403
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
Regular price:
325,20 zł
0%
400,00 zł
Price
400,00 zł
Regular price:
400,00 zł
0%
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller NISSAN MICRA MEC32110 D2
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ENGINE CONTROL UNIT NISSAN MICRA MEC32110
The MEC32110 engine control unit is an original ECU module designed for Nissan Micra. It is responsible for precise management of the engine operation, fuel injection control, and cooperation with the vehicle’s electronic systems, ensuring stable performance and proper engine functionality.
FAQ – ECU ENGINE CONTROLLER NISSAN MICRA MEC32110 (D2 version)
What is the function of the MEC32110 D2 ECU ENGINE CONTROLLER in Nissan Micra?
The ECU ENGINE CONTROLLER MEC32110 (D2) manages the operation of the engine, controlling fuel injection, ignition, and communication with engine sensors. Thanks to this, the vehicle maintains stable performance, smooth operation, and proper emission parameters.
In which Nissan Micra versions is the MEC32110 D2 ECU ENGINE CONTROLLER used?
The MEC32110 D2 module was installed in selected model years and engine versions of Nissan Micra. Before purchasing, it is recommended to check the ECU number or verify compatibility using the VIN number to ensure proper fitment.
How can I make sure that the MEC32110 D2 ECU fits my car?
The most reliable method is to check the markings on the currently installed unit. If the number MEC32110 (D2) is present, the module is compatible with your vehicle. In case of doubt, we encourage you to contact us before purchase.
Why is the ECU available in the D2 version?
The D2 designation indicates a specific revision of the MEC32110 ECU, adapted to selected engine variants and electronic systems in Nissan Micra. This ensures full compatibility and proper vehicle operation.
What is the best way to search for the MEC32110 D2 ECU online?
The best method is to enter the full part number including the version designation, e.g. MEC32110 D2 Nissan Micra, which allows you to find the exact matching unit.
Is programming required after replacing the MEC32110 D2 ECU?
Yes — after installing a new ECU, adaptation and synchronization with the immobilizer and other electronic systems of the vehicle are required to ensure proper operation.
What variants of the ECU do we offer in our store?
Our offer includes the MEC32110 (D2) ECU in a ready-to-install version, fully functional and tested for compatibility with Nissan Micra.
What is the order processing time for the MEC32110 D2 ECU?
If the ECU is available in stock, shipping is usually carried out within 24–48 hours. Current information can be found in the product description.
What should I do if the ordered MEC32110 D2 ECU turns out to be unsuitable?
In such a case, please contact us by providing the part number and vehicle details. We will advise the correct ECU or suggest other compatible solutions.
