A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Skoda Fabia 1.4 Magneti Marelli MY2 03C906024R 6160142204
Vendors's code: 03C906024F
Product code: 03C906024R
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Skoda Fabia 1.4 Magneti Marelli MY2 03C906024R 6160142204
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.19
-
shipping
(Poland)
from
£23.19
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Skoda Fabia 1.4 Engine
Looking for an ECU for your Skoda Fabia 1.4? Ensure compatibility by matching OEM number 03C906024R and manufacturer code 6160142204 with your current unit.
This part is verified and comes with a 6-month warranty. Fast shipping available. Order now at Auto24Parts!
Engine Control Unit for Skoda Fabia 1.4 – 03C906024R
This ECU is designed for the Skoda Fabia with a 1.4 engine. It's crucial to match the identification numbers from your existing module's label.
The offered unit bears the codes 03C906024R, 03C906024F, MY2 4HV.R, MY24HVR, MAGNETI MARELLI, and 6160142204. Use these numbers to confirm compatibility.
How to ensure ECU compatibility?
Before purchasing, compare the full OEM number and manufacturer code with your old ECU's label. The car model and engine capacity alone may not be sufficient to confirm compatibility.
After installation, programming or immobilizer adaptation might be necessary. The required actions depend on the vehicle's configuration. Check available part variants before buying.
Product condition and warranty
This is a used, original part that has been tested. It comes with a 6-month warranty. Auto24Parts offers fast shipping.
FAQ – Questions and Answers
Does the 03C906024R ECU fit every Skoda Fabia 1.4?
Do not assume compatibility based solely on the car model. Compare the number 03C906024R, the code 6160142204, and other identifiers.
What does the Magneti Marelli MY2 4HV.R number mean?
This is the identification code for the Magneti Marelli ECU. Check it along with the OEM number 03C906024F to avoid purchasing the wrong part.
Is the MY24HVR code important when selecting an ECU?
Yes. The MY24HVR code provides additional identification information. Compare it with other numbers on your module before ordering.
Does a used engine control unit require programming?
Depending on the car version and module configuration, programming or immobilizer adaptation may be needed. Confirm the required steps with a workshop before installation.
What if the numbers on my ECU don't match exactly?
Do not choose a part based solely on similar appearance. Before buying, send the seller a photo of the label and the ECU numbers to confirm compatibility.
