A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Skoda Fabia 1.9 TDI Bosch 038906019AF 0281010289
Vendors's code: 038906019AF
Product code: 038906019AF
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Skoda Fabia 1.9 TDI
Looking for an ECU for your Skoda Fabia 1.9 TDI? Verify OEM numbers 038906019AF and Bosch 0281010289 on your module before purchase.
This verified used part comes with a 6-month warranty. Fast shipping. Order now at Auto24Parts.
ECU for Skoda Fabia 1.9 TDI – 038906019AF
This engine control unit is designed for the Skoda Fabia with a 1.9 TDI engine. It is crucial to compare the identification numbers from your current module's label.
The offered ECU features markings 038906019AF, 038 906 019 AF, BOSCH 0281010289, 0 281 010 289, DIESEL EDC15P+, 8606, 22906, 22907. This aids in finding the correct replacement.
How to ensure part compatibility?
Before purchasing, compare the full OEM number and manufacturer marking with your old ECU's label. The car model and engine capacity alone may not suffice.
After installation, programming or immobilizer adaptation may be required. Check with your workshop before installation.
Warranty and technical condition
The offered ECU is a used, original part that has been tested. It comes with a 6-month warranty. Auto24Parts ensures fast shipping.
FAQ – Frequently Asked Questions
Does the 038906019AF ECU fit all Skoda Fabia 1.9 TDI models?
No, you need to compare the number 038906019AF and marking 0281010289 with your module's label.
What does the Bosch 0281010289 number signify?
This is the Bosch manufacturer marking. Verify it with OEM 038 906 019 AF for compatibility assurance.
Is the EDC15P+ marking important when buying?
Yes, the EDC15P+ marking provides additional identification. Ensure it matches your vehicle.
Does a used ECU require programming?
Programming or immobilizer adaptation may be necessary. Consult your workshop before installation.
What if the numbers on my ECU differ?
Do not select parts based solely on appearance. Send the seller a photo of your label and numbers to confirm compatibility.