A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Controller Seat VW Skoda Octavia 2.0 TDI Bosch 0281012292 03G906016HF
Vendors's code: 03G906016HF
Product code: 0281012292
Barcode:
Code 39:
ISBN:
£93.80
Price
£93.80
£115.38
Price
£115.38
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Controller Seat VW Skoda Octavia 2.0 TDI Bosch 0281012292 03G906016HF
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.08
-
shipping
(Poland)
from
£23.08
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Seat VW Skoda Octavia 2.0 TDI
Looking for an engine controller for your car? Make sure the OEM numbers 03G906016HF and Bosch 0281012292 match your current module.
This is a verified part with a 6-month warranty. Take advantage of fast shipping and order from Auto24Parts today!
Engine Controller for Seat VW Skoda Octavia 2.0 TDI
The offered ECU is compatible with Seat, VW, and Skoda Octavia models equipped with a 2.0 TDI engine. Ensure exact fit by comparing identification numbers with your existing module.
This part features the following codes: 0281012292, 03G906016HF. Use these numbers to ensure you are purchasing the correct controller.
How to verify controller compatibility?
Before purchasing, compare the OEM numbers and manufacturer markings with the label on your old controller. The vehicle model and engine type alone may not be sufficient to confirm compatibility.
After installation, programming or immobilizer matching may be necessary. Consult with a workshop to determine the required steps.
Part condition and warranty
This is an original, used part that has been thoroughly tested. The product comes with a 6-month warranty. Auto24Parts offers fast shipping to ensure you can enjoy a functioning vehicle quickly.
FAQ – frequently asked questions
Does this controller fit every Octavia 2.0 TDI model?
No, compatibility must be confirmed by comparing the numbers 03G906016HF and 0281012292 with your current controller.
What does the Bosch number 0281012292 signify?
This is the identification number assigned by Bosch, allowing for precise part matching to your vehicle.
What if the numbers on my controller differ?
It's not recommended to purchase based solely on visual similarity. Send a picture of the label and numbers to the seller to confirm compatibility.
Does replacing the controller require special tools?
Replacement may require programming or immobilizer matching. Consult with a professional workshop to learn more.
Can I install this controller myself?
Installing the controller may require specialist knowledge and tools. It's recommended to use a qualified mechanic's services.
