A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller PEUGEOT 307 1.4 HDI 0281010390 9646313280 9644157380
Vendors's code:
Product code: 5CAA-245EE
Barcode:
Code 39:
ISBN:
£110.17
Price
£110.17
Regular price:
£110.17
0%
£135.51
Price
£135.51
Regular price:
£135.51
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller PEUGEOT 307 1.4 HDI 0281010390 9646313280 9644157380
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.23
-
shipping
(Poland)
from
£23.23
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine ECU Controller PEUGEOT 307 1.4 HDI BOSCH 0281010390 / 9646313280 / 9644157380
Original BOSCH engine controller for PEUGEOT 307 1.4 HDI, fully compatible with part numbers 0281010390, 9646313280 and 9644157380, designed for safe replacement of a damaged module.
ECU ENGINE CONTROLLER 0281010390 / 9646313280
What is the function of the ECU ENGINE CONTROLLER 0281010390?
The ECU unit marked with the number 0281010390 manages engine operation by analyzing signals from sensors and regulating injection parameters. It controls the fuel dose, ignition timing (in petrol engines) or the injection system in diesel engines, as well as communication with the immobilizer.
What does the number 9646313280 identify?
The number 9646313280 is a catalog designation that allows precise identification of the software version and technical specification of the controller. Thanks to it, the correct module can be matched without the risk of incompatibility.
Are 0281010390 and 9646313280 the same part?
Yes, 0281010390 is the manufacturer’s controller number, while 9646313280 is the number assigned in the vehicle manufacturer’s catalog. Both markings refer to the same ECU model but function in different numbering systems.
How to verify whether the controller 9646313280 will fit?
The best way is to check the number located on the housing of the currently installed engine computer. If 9646313280 or 0281010390 appears there, it indicates hardware compatibility. Additionally, compatibility can be confirmed based on the VIN number.
Why is it worth searching for an ECU by the number 0281010390?
Entering the full number 0281010390 in a search engine allows you to precisely find the correct controller, eliminating errors resulting from a general description of the car model or engine version.
Is adaptation required after installing 0281010390?
In most cases, yes. After installing the controller 0281010390, programming or synchronization with the immobilizer is required so that the module can properly cooperate with the vehicle electronics.
What differences may occur between controllers with the number 9646313280?
Controllers marked 9646313280 may differ in condition (for example locked or prepared for adaptation). In terms of design, this number indicates a specific hardware and software version.
How to check the correctness of the number 0281010390 before purchase?
It is recommended to carefully compare all markings from the ECU nameplate. In addition to the number 0281010390, it is worth paying attention to additional symbols and production codes.
How long does order processing take for 9646313280?
If the controller 9646313280 is available in stock, shipping usually takes place within 24–48 working hours. Details regarding availability are included in the offer description.
What should be done in case of a mismatch of the number 0281010390?
If there are doubts regarding the number 0281010390 or 9646313280, it is worth contacting us before installation. Providing the full markings from the housing will allow compatibility to be verified and avoid selecting the wrong part.
