A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller Volkswagen Crafter 0281019932 03L906021A EDC17C64
Vendors's code:
Product code: F91C-92688
Barcode:
Code 39:
ISBN:
$586.30
Price
$586.30
$721.15
Price
$721.15
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller Volkswagen Crafter 0281019932 03L906021A EDC17C64
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.91
-
shipping
(Poland)
from
$30.91
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ENGINE CONTROL UNIT VOLKSWAGEN CRAFTER 0281019932 03L906021A
The engine control unit 0281019932 and 03L906021A is a high-quality component dedicated to Volkswagen Crafter. It ensures reliable and stable engine operation, supporting optimal performance of the power unit.
FAQ – Engine Control Unit 0281019932 / 03L906021A
What is the function of the engine control unit 0281019932?
The ECU module with part number 0281019932 is responsible for electronic management of the engine unit. It analyzes data from sensors (including temperature, pressure, air flow) and on this basis controls fuel injection, turbo boost and other engine operating parameters. Thanks to this, the vehicle maintains optimal smooth operation and proper performance.
What does the number 03L906021A mean on the control unit?
The designation 03L906021A is the manufacturer’s catalog number that identifies a specific software version and hardware configuration of the ECU. When selecting a part, number compatibility is crucial – both 03L906021A and 0281019932 should match the marking on the currently installed module.
Are 0281019932 and 03L906021A the same control unit?
The numbers 0281019932 and 03L906021A refer to the same type of engine control unit, however they come from different numbering systems (electronics manufacturer / OE number). In practice, both designations describe a compatible ECU module used in specific vehicle versions.
How to check if the 03L906021A control unit will fit my car?
The safest method is to compare the number 03L906021A or 0281019932 with the marking on the housing of the currently installed control unit. Matching the catalog number guarantees electrical and software compatibility. In case of doubt, it is worth verifying the part by VIN number.
Why is it worth searching for the control unit by number 0281019932?
Entering the full number 0281019932 in the search engine allows you to precisely find the correct engine control unit, without the risk of confusing it with another ECU version. This is the most effective way to avoid selecting the wrong part.
Is programming required after installing ECU 0281019932?
Yes. After installing the engine control unit 0281019932, adaptation, coding or synchronization with the immobilizer is usually required. This procedure enables proper communication of the module with the vehicle electronics.
What symptoms may indicate damage to control unit 03L906021A?
Typical symptoms include starting problems, lack of diagnostic communication, uneven engine operation, emergency mode or appearing injection control errors. In such cases, verifying the number 03L906021A allows selection of the appropriate replacement.
Is the offered engine control unit 0281019932 tested before shipping?
Each 0281019932 control unit undergoes visual inspection and verification of catalog numbers. Thanks to this, the customer receives a part consistent with the description and prepared for further installation.
What should I do if the ordered control unit 03L906021A turns out to be unsuitable?
In such a situation, please contact customer service providing the number 03L906021A or 0281019932 and vehicle details. This will enable quick verification of compatibility and selection of the proper solution.
