A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller FORD TRANSIT 0281036223 JV6A12A650AJA
Vendors's code: JV6A12A650AJA
Product code: 0281036223
Barcode:
Code 39:
ISBN:
€406.50
Price
€406.50
Regular price:
€406.50
0%
€500.00
Price
€500.00
Regular price:
€500.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller FORD TRANSIT 0281036223 JV6A12A650AJA
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ford Transit JV6A12A650AJA – engine ECU Bosch 0281036223
Original Bosch engine control unit with part numbers 0281036223 and JV6A12A650AJA, intended for compatible versions of the Ford Transit.
Frequently asked questions – Ford Transit engine control unit 0281036223
1. Is the 0281036223 engine control unit compatible with my Ford Transit?
The Bosch ECU 0281036223 is used in Ford Transit vehicles and selected versions of the Transit Connect. Before purchasing, we recommend comparing all part numbers with the original module and confirming compatibility using the vehicle VIN.
2. Is JV6A12A650AJA the same part number as JV6A-12A650-AJA?
Yes. JV6A12A650AJA and JV6A-12A650-AJA are two ways of writing the same Ford part number. The ECU housing may also show Bosch references and additional identification numbers.
3. Which part numbers should I check when selecting this engine ECU?
One of the most important references is the Bosch number 0 281 036 223 / 0281036223. This ECU family may also carry Ford numbers JV6A-12A650-AJA and JV6A-12B684-TB. The safest method is to compare the complete set of numbers with the control unit removed from the vehicle.
4. Does the Ford Transit ECU JV6A12A650AJA require programming after replacement?
Depending on how the replacement ECU has been prepared and on the vehicle configuration, programming, coding or transfer of data from the original ECU may be required. Before ordering, we can check which preparation option is suitable for the specific vehicle.
5. How can I make sure that ECU 0281036223 is the correct unit before purchasing?
Send us the vehicle VIN and a photo of the label on the original control unit. We can verify the references 0281036223, JV6A12A650AJA, JV6A-12A650-AJA and the remaining numbers to reduce the risk of ordering an incorrect Ford engine control unit.
