A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Immobiliser Control Unit Mercedes-Benz Sprinter TEMIC A0335456032 0335456032
Vendors's code:
Product code: FEF8-4573C
Barcode:
Code 39:
ISBN:
Ask about the product
Immobiliser Control Unit Mercedes-Benz Sprinter TEMIC A0335456032 0335456032
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.19
-
shipping
(Poland)
from
£23.19
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Immobiliser control unit A0335456032 – does it fit your Sprinter?
This is a used, working immobiliser control unit made by TEMIC, Mercedes-Benz number A0335456032 (on the label 033 545 60 32). The unit comes from a Mercedes-Benz Sprinter (901–905), 1995–2006. Before buying, compare the number with the label on the control unit in your vehicle.
Immobiliser Control Unit Mercedes-Benz Sprinter TEMIC A0335456032
The immobiliser control unit reads the transponder in the key (125 kHz) and the remote control signal (433 MHz), and once it recognises the correct key it releases the engine start lock. This TEMIC unit was fitted to the Mercedes-Benz Sprinter (901–905) built between 1995 and 2006.
Part numbers to compare
- A0335456032 – Mercedes-Benz number, on the label: 033 545 60 32
- 0335456032 – the same number written without the A prefix
You will find the number on the label on the control unit housing. Choose the part by the full Mercedes-Benz number – in catalogues it is listed with the letter A at the start, while the label shows it without the A.
Symptoms of a faulty immobiliser control unit
When the immobiliser control unit starts to fail, the most common symptoms are:
- the engine will not start even with the correct key,
- the remote does not lock or unlock the vehicle,
- immobiliser fault codes stored in the fault memory,
- no communication with the control unit during diagnostics.
Before replacing it, check the fuses, power supply, earth connection and connectors of the control unit, as well as the battery in the remote, and read the fault codes with a diagnostic tool – a faulty transponder in the key causes similar symptoms. After replacement, the control unit must be matched to the keys and the engine control unit with a diagnostic tool.
Frequently asked questions
| Which vehicle does the immobiliser control unit A0335456032 fit? |
|---|
| This control unit comes from a Mercedes-Benz Sprinter (901–905), 1995–2006. Match it by the Mercedes-Benz number A0335456032 – compare it with the label on the control unit in your vehicle. |
| What is the difference between A0335456032 and 033 545 60 32? |
| It is the same Mercedes-Benz number – the label shows it as 033 545 60 32, while catalogues list it with the letter A as A0335456032. TEMIC is the manufacturer of the unit. |
| Does the control unit need to be matched after fitting? |
| Yes, after fitting the control unit must be matched to the keys and the engine control unit with a diagnostic tool. |
| What condition is this control unit in? |
| It is a used part in good working condition. The warranty period is shown in the product specification table. |
Not sure whether this control unit fits your vehicle? Send us a photo of the label on your old unit and we will check compatibility.
