A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Throttle Body BMW Pierburg B61871369 779148105
Vendors's code: 779148105
Product code: B61871369
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Throttle body B61871369 Pierburg – is it the right part for your car?
This is a used, working Pierburg throttle body with part numbers B61871369 and 779148105, for: BMW (engines: 3.0), 2006–2007. To confirm the fit, compare the number with the label on the throttle body in your car.
Throttle Body Pierburg B61871369 779148105 – BMW
In a diesel engine the B61871369 throttle body does not control power – it closes the intake when the engine is switched off to reduce shaking, and in many engines it also assists exhaust gas recirculation (EGR) control. According to the product data, it fits: BMW; engines: 3.0; production years: 2006–2007.
Part numbers to compare
- B61871369 – also printed as B6 187 1369
- 779148105 – also printed as 7 791 481 05
The label on the throttle body fitted to your car should show the number B61871369 or 779148105. The make alone (BMW) is not enough to choose the part – throttle bodies with different numbers were fitted to cars of this make.
Common throttle body faults
When the throttle body in a BMW starts to fail, the most common signs are:
- soot from the EGR system on the flap – sticking flap, fault codes stored in the engine control unit,
- failed motor or position sensor – engine warning light, limp mode,
- flap not closing fully – the engine may shake when switched off.
If cleaning does not help and diagnostics point to a throttle body or position sensor fault, replacement with a part carrying the same number is usually required. After fitting, many cars need an adaptation according to the vehicle manufacturer's procedure.
Questions and answers
| How do I check that the B61871369 throttle body fits my car? |
|---|
| Compare the number B61871369 or 779148105 with the label of the throttle body fitted to your car (BMW). |
| Which engines does the B61871369 throttle body fit? |
| According to the product data, it fits 3.0 engines in: BMW, 2006–2007. |
| Does the throttle body need to be adapted (relearned) after replacement? |
| In many cars, yes: after fitting, the engine control unit learns the end positions of the throttle. This is done with a diagnostic tool or by following the procedure described by the car manufacturer. |
| What condition is this throttle body in? |
| It is a used, working unit in good condition. The warranty is listed in the product specification table. |
Need help choosing a part for your BMW? Send us the number from your throttle body's label and we will confirm whether this part will fit.