A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller VOLKSWAGEN 0261S04620 03C906027Q MED17.5.5
Vendors's code:
Product code: B5FD-85633
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Volkswagen ECU Engine Controller 0261S04620 / 03C906027Q / MED17.5.5
The ECU engine controller 0261S04620, 03C906027Q and MED17.5.5 is a proven part that ensures stable and proper engine operation in Volkswagen vehicles.
What is the role of the ECU engine controller Volkswagen 0261S04620 / 03C906027Q?
The ECU engine controller with part numbers 0261S04620 and 03C906027Q, operating on the MED17.5.5 system, is responsible for managing the engine operation. It controls fuel injection, ignition and sensor communication, ensuring smooth, stable and predictable engine performance.
Which vehicles use the ECU engine controller 03C906027Q?
This ECU engine controller is installed in selected Volkswagen models with petrol engines. Exact compatibility depends on engine version and production year, therefore it is recommended to compare the ECU number or contact us for VIN verification.
How can I confirm that this ECU engine controller fits my car?
The most reliable method is to check the numbers on the ECU housing. If 0261S04620 or 03C906027Q is listed, the ECU engine controller is compatible. You may also send us a photo of your current ECU for verification.
How to search for the MED17.5.5 ECU engine controller online?
The best results come from using the full part number, e.g. 03C906027Q. It is also worth searching by the manufacturer number 0261S04620, as different shops may use different number formats.
Does the ECU engine controller 0261S04620 require programming?
Yes — ECU engine controllers from the MED17 family usually require programming, adaptation or cloning to work correctly with the immobilizer and vehicle electronics. This is standard after ECU replacement.
What ECU engine controller variants are available in our shop?
We offer two ECU engine controller variants: a locked version and a unlocked (virgin) version. Please read the variant descriptions carefully before choosing.
How fast is shipping of the ECU engine controller?
If the ECU engine controller 0261S04620 / 03C906027Q is in stock, shipping is usually completed within 24–48 hours.
What if the ordered ECU engine controller is not suitable?
Contact us with the part number and vehicle model. We will help you choose the correct ECU engine controller or offer a compatible alternative.