A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller CITROEN SAXO SAGEM 216471301 9645704380
Vendors's code:
Product code: 28D7-221CF
Barcode:
Code 39:
ISBN:
€142.28
Price
€142.28
Regular price:
€142.28
0%
€175.00
Price
€175.00
Regular price:
€175.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller CITROEN SAXO SAGEM 216471301 9645704380
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU engine controller Citroen Saxo Sagem 216471301 9645704380
The original Citroen Saxo Sagem ECU engine controller with numbers 216471301 / 9645704380 is available in locked or unlocked version – check the description of variants before purchasing.
What is the Ecu engine controller Citroën Saxo 216471301?
The Ecu engine controller 216471301 by Sagem is an electronic unit in the Citroën Saxo. It ensures correct engine operation, stable car startup, and smooth daily driving.
What function does the Ecu engine controller 9645704380 perform?
The Ecu engine controller 9645704380 controls the engine based on information from sensors and vehicle systems. Thanks to it, the engine runs evenly, responds properly to the accelerator, and maintains correct parameters under various conditions.
Do the numbers 216471301 and 9645704380 refer to the same controller?
Yes, the designations 216471301 and 9645704380 refer to the same Ecu engine controller for the Citroën Saxo. Differences result only from manufacturer numbering and PSA codes, while the function remains identical.
Which Citroën Saxo models are compatible with the 216471301 controller?
The 216471301 controller is used in selected Citroën Saxo versions. If this number appears on your controller, it indicates full compatibility with the engine and vehicle equipment.
Is the Ecu engine controller 9645704380 available in different variants?
Yes, the Ecu engine controller 9645704380 is available in locked and unlocked variants. Before purchase, it is worth checking the variant descriptions to select the appropriate version.
When should the Ecu engine controller 216471301 be replaced?
Replacement of the Ecu engine controller 216471301 is recommended when there are problems starting the car, uneven engine operation, or electronic errors. A working controller restores driving comfort and safety.
Why is the 9645704380 controller number important?
The number 9645704380 allows precise matching of the controller to the correct Citroën Saxo engine version. Part number compatibility is key to proper operation and trouble-free installation.
