A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller MERCEDES BENZ 0281012352 A6461502491
Vendors's code: A6461502491
Product code: 0281012352
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
Regular price:
€243.90
0%
€300.00
Price
€300.00
Regular price:
€300.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller MERCEDES BENZ 0281012352 A6461502491
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Mercedes-Benz – Engine ECU 0281012352 A6461502491
Tested Mercedes-Benz engine ECU with part numbers 0281012352 and A6461502491, available with warranty and fast shipping.
Q&A – Mercedes-Benz Engine ECU 0281012352 A6461502491
How do I choose the correct Mercedes-Benz 0281012352 ECU for my vehicle?
When selecting a Mercedes-Benz engine ECU, it is best to compare the Bosch number 0281012352 with the reference shown on the original control unit. Matching part numbers helps reduce the risk of purchasing an incorrect version.
Where can I find the A6461502491 number on a Mercedes-Benz ECU?
The Mercedes part number A6461502491 can be found on the label or housing of the engine ECU. Before purchasing, it is advisable to check this number on the original unit and compare it with the references of the replacement ECU.
Is the 0281012352 A6461502491 engine ECU designed for Mercedes-Benz CDI models?
The ECU with part numbers 0281012352 and A6461502491 is used in selected Mercedes-Benz vehicles equipped with CDI diesel engines. Exact compatibility should always be confirmed using the part numbers of the original ECU.
Is the Mercedes A6461502491 number enough to order the correct ECU?
The A6461502491 number is an important reference when searching for a Mercedes-Benz ECU, but it is also recommended to check the Bosch number. If the original unit is marked 0281012352, selecting the correct replacement becomes much easier.
Is the Bosch 0281012352 Mercedes-Benz ECU tested before sale?
Yes, the Bosch engine ECU 0281012352 / A6461502491 offered for sale is a tested product. The unit is supplied with a warranty and prepared for fast dispatch.
